新版TeamTalk部署教程
新版TeamTalk已经在日发布了，目前版本定为1.0.0版本，后续版本号会按照如下规则进行：
1、版本规则按照x.y.z的形式进行。
2、各端小bug修复则版本号中z增加。
3、有新的feature增加，则版本号中y增加。
4、有重大更新及不兼容更新，则版本号x增加。
本教程会在VirtualBox 虚拟机中进行安装部署一整套服务端，并做记录，给大家做个参考，后面会将整个虚拟机打包上传到网盘中，为那些不想自己亲自部署的人一个可用环境。
这篇博客中，不会使用一键部署脚本，我会一步一步手动去部署。另外我会尽量选择源码安装mysql，php，nginx等，后面所有的安装在/usr/local/目录下。(源码安装很多参考了军哥(http://www.lnmp.org)的脚本，在此表示感谢)。
真个部署过程从晚上8:00开始到半夜将近2:00(由于时间太晚了，明天还要上班，所以配置那块后面再写),耗时近6个小时，所以本文也耗时5个多小时才完成，希望可以帮助到大家。
更新了配置文件说明
更新了数据库导入，及问题修复。
修复mysql下载不了问题,感谢@Gene反馈。
我的环境如下:
虚拟机:VirtualBox 4.3.18
操作系统:CentOS 6.5 x64
IP:192.168.1.150
下面我们正式开始:
1、更新操作系统
更新操作系统:
CentOS 使用如下命令:
yum update
Ubuntu 使用如下命令:
apt-get update
该命令会执行更新，会消耗一段时间，国内用户，建议使用科大源或者163，搜狐等都可以，这会为大家节省很多时间，具体使用方法，可以见相关的页面:
163源帮助:/.help/centos.html
:/.help/ubuntu.html
搜狐源帮助:/help/centos.html
:/help/ubuntu.html
科大源帮助:https://lug./wiki/mirrors/help/centos
:https://lug./wiki/mirrors/help/ubuntu
执行上面命令后，会检查一些更新，会出现如下图:
后面会询问是否安装更新，有可能会询问你是否需要导入密钥之类的，输入y即可，如下图所示:
2、删除已经安装的软件
为了减少一些不必要的麻烦，我们需要先卸载系统自带的一些软件，譬如mysql，nginx，php，执行以下命令:
CentOS 执行如下命令:
yum -y remove httpd* php* mysql-server mysql mysql-libs php-mysql
Ubuntu 使用如下命令:
apt-get remove -y apache2 apache2-doc apache2-utils apache2.2-common apache2.2-bin apache2-mpm-prefork apache2-doc apache2-mpm-worker mysql-client mysql-server mysql-common php5 php5-common php5-cgi php5-mysql php5-curl php5-gd
killall apache2
dpkg -l |grep mysql
dpkg -P libmysqlclient15off libmysqlclient15-dev mysql-common
dpkg -l |grep apache
dpkg -P apache2 apache2-doc apache2-mpm-prefork apache2-utils apache2.2-common
dpkg -l |grep php
dpkg -P php5 php5-common php5-cgi php5-mysql php5-curl php5-gd
apt-get purge `dpkg -l | grep php| awk '{print $2}'`
如下图所示:
3、安装必要的依赖软件
由于我选择的是CentOS 最小化安装，所以系统中很多软件是没有安装的，需要我手动安装。
执行如下命令安装一些依赖软件:
CentOS 使用如下命令:
yum -y install wget vim git texinfo patch make cmake gcc gcc-c++ gcc-g77 flex bison file libtool libtool-libs autoconf kernel-devel libjpeg libjpeg-devel libpng libpng-devel libpng10 libpng10-devel gd gd-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glib2 glib2-devel bzip2 bzip2-devel libevent libevent-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel vim-minimal nano fonts-chinese gettext gettext-devel ncurses-devel gmp-devel pspell-devel unzip libcap diffutils
ubuntu 使用如下命令:
apt-get autoremove -y
apt-get -fy install
apt-get install -y build-essential gcc g++ make
apt-get install -y --force-yes wget vim git texinfo patch build-essential gcc g++ make cmake automake autoconf re2c wget cron bzip2 libzip-dev libc6-dev file rcconf flex vim nano bison m4 gawk less make cpp binutils diffutils unzip tar bzip2 libbz2-dev unrar p7zip libncurses5-dev libncurses5 libncurses5-dev libncurses5-dev libtool libevent-dev libpcre3 libpcre3-dev libpcrecpp0
libssl-dev zlibc openssl libsasl2-dev libltdl3-dev libltdl-dev libmcrypt-dev zlib1g zlib1g-dev libbz2-1.0 libbz2-dev libglib2.0-0 libglib2.0-dev libpng3 libjpeg62 libjpeg62-dev libjpeg-dev libpng-dev libpng12-0 libpng12-dev curl libcurl3 libmhash2 libmhash-dev libpq-dev libpq5 gettext libncurses5-dev libcurl4-gnutls-dev libjpeg-dev libpng12-dev libxml2-dev zlib1g-dev libfreetype6 libfreetype6-dev libssl-dev libcurl3 libcurl4-openssl-dev libcurl4-gnutls-dev mcrypt libcap-dev diffutils ca-certificates debian-keyring debian-archive-
apt-get -fy install
apt-get -y autoremove
过程如下图所示:
如下图安装结束:
4、安装mysql
本次安装的mysql版本是5.6.选择从搜狐源下载，编译过程漫长。
wget /mysql/MySQL-5.6/mysql-5.6.23.tar.gz
4.2 解压编译
执行如下命令:
tar -zxvf mysql-5.6.23.tar.gz
cd mysql-5.6.23
cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DEXTRA_CHARSETS=all -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_READLINE=1 -DWITH_SSL=system -DWITH_ZLIB=system -DWITH_EMBEDDED_SERVER=1 -DENABLED_LOCAL_INFILE=1
make -j 2 && make install
编译将是一个漫长得过程。。。不同的机器性能等待时间不同。
make的-j参数可以使make进行并行编译编译。我cpu的个数是2，所以指定为2.
4.3 添加mysql用户
groupadd mysql
useradd -s /sbin/nologin -M -g mysql mysql
4.4 修改配置文件
下面给出一份参考配置(只是测试用，如果要用于生产环境，请自行调配):
# Example MySQL config file for medium systems.
# The following options will be passed to all MySQL clients
= your_password
= /tmp/mysql.sock
default-character-set=utf8mb4
# Here follows entries for some specific programs
# The MySQL server
bind-address=127.0.0.1
= /tmp/mysql.sock
datadir = /usr/local/mysql/var
collation-server
= utf8mb4_general_ci
character-set-server = utf8mb4
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
# Uncomment the following if you are using InnoDB tables
innodb_data_home_dir = /usr/local/mysql/var
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = /usr/local/mysql/var
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50
[mysqldump]
max_allowed_packet = 16M
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set=utf8mb4
[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
4.5 初始化mysql
/usr/local/mysql/scripts/mysql_install_db --defaults-file=/f --basedir=/usr/local/mysql --datadir=/usr/local/mysql/var --user=mysql
chown -R mysql /usr/local/mysql/var
chgrp -R mysql /usr/local/mysql/.
cp support-files/mysql.server /etc/init.d/mysql
chmod 755 /etc/init.d/mysql
cat & /etc/ld.so.conf.d/mysql.conf&&EOF
/usr/local/mysql/lib
/usr/local/lib
4.6 启动mysql
/etc/init.d/mysql start
4.7 查看mysql进程
ps -ef|grep mysql
如果看到下图，恭喜你，mysql安装成功:
4.8 后期配置
ln -s /usr/local/mysql/lib/mysql /usr/lib/mysql
ln -s /usr/local/mysql/include/mysql /usr/include/mysql
ln -s /usr/local/mysql/bin/mysql /usr/bin/mysql
ln -s /usr/local/mysql/bin/mysqldump /usr/bin/mysqldump
ln -s /usr/local/mysql/bin/myisamchk /usr/bin/myisamchk
ln -s /usr/local/mysql/bin/mysqld_safe /usr/bin/mysqld_safe
登陆mysql:
mysql -uroot -p
修改密码(假定密码为:test123):
update user set password=password('$mysqlrootpwd') where user='root';
退出，重新登陆:
mysql -uroot -p
整个过程如下图:
至此，mysql 已经安装结束。退出到上一层目录
5、安装PHP
本次安装的PHP是php 5.3.28，选择从搜狐源下载。
5.1 下载PHP
wget /php/php-5.3.28.tar.gz
5.2 安装依赖
安装依赖的库，我选择从chinaunix.net下载的，速度也还可以。
5.2.1 libiconv
wget http://down1.chinaunix.net/distfiles/libiconv-1.14.tar.gz
tar -zxvf libiconv-1.14.tar.gz
cd libiconv-1.14
./configure
make -j 2&& make install
5.2.2 libmcrypt
wget http://down1.chinaunix.net/distfiles/libmcrypt-2.5.7.tar.gz
tar -zxvf libmcrypt-2.5.7.tar.gz
cd libmcrypt-2.5.7
./configure
make -j 2&& make install
cd libltdl/
./configure --enable-ltdl-install
make && make install
5.2.3 mhash
wget http://down1.chinaunix.net/distfiles/mhash-0.9.3.tar.gz
tar -zxvf mhash-0.9.3.tar.gz
cd mhash-0.9.3
./configure
make -j 2 && make install
5.2.4 其他
5.3 解压编译
tar -zxvf php-5.3.28.tar.gz
cd php-5.3.28
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --enable-fpm --with-fpm-user=www --with-fpm-group=www --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv-dir --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-magic-quotes --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --enable-mbregex --enable-mbstring --with-mcrypt --enable-ftp --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --without-pear --with-gettext --disable-fileinfo
make -j 2 ZEND_EXTRA_LIBS='-liconv' && make install
5.4 配置php
cp php.ini-production /usr/local/php/etc/php.ini
sed -i 's/post_max_size = 8M/post_max_size = 50M/g' /usr/local/php/etc/php.ini
sed -i 's/upload_max_filesize = 2M/upload_max_filesize = 50M/g' /usr/local/php/etc/php.ini
sed -i 's/;date.timezone =/date.timezone = PRC/g' /usr/local/php/etc/php.ini
sed -i 's/short_open_tag = Off/short_open_tag = On/g' /usr/local/php/etc/php.ini
sed -i 's/; cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g' /usr/local/php/etc/php.ini
sed -i 's/; cgi.fix_pathinfo=0/cgi.fix_pathinfo=0/g' /usr/local/php/etc/php.ini
sed -i 's/;cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g' /usr/local/php/etc/php.ini
sed -i 's/max_execution_time = 30/max_execution_time = 300/g' /usr/local/php/etc/php.ini
sed -i 's/register_long_arrays = On/;register_long_arrays = On/g' /usr/local/php/etc/php.ini
sed -i 's/magic_quotes_gpc = On/;magic_quotes_gpc = On/g' /usr/local/php/etc/php.ini
sed -i 's/disable_functions =.*/disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server/g' /usr/local/php/etc/php.ini
5.5 后期配置
ln -s /usr/local/php/bin/php /usr/bin/php
ln -s /usr/local/php/bin/phpize /usr/bin/phpize
ln -s /usr/local/php/sbin/php-fpm /usr/bin/php-fpm
5.6 安装ZendGuardLoader
mkdir -p /usr/local/zend/
wget /guard/5.5.0/ZendGuardLoader-php-5.3-linux-glibc23-x86_64.tar.gz
tar -zxvf ZendGuardLoader-php-5.3-linux-glibc23-x86_64.tar.gz
cp ZendGuardLoader-php-5.3-linux-glibc23-x86_64/php-5.3.x/ZendGuardLoader.so /usr/local/zend/
cat &&/usr/local/php/etc/php.ini&&EOF
;eaccelerator
[Zend Optimizer]
zend_extension=/usr/local/zend/ZendGuardLoader.so
zend_loader.enable=1
zend_loader.disable_licensing=0
zend_loader.obfuscation_level_support=3
zend_loader.license_path=
5.7 修改php-fpm配置文件
cat &/usr/local/php/etc/php-fpm.conf&&EOF
pid = /usr/local/php/var/run/php-fpm.pid
error_log = /usr/local/php/var/log/php-fpm.log
log_level = notice
listen = /tmp/php-cgi.sock
listen.backlog = -1
listen.allowed_clients = 127.0.0.1
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
pm = dynamic
pm.max_children = 10
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 6
request_terminate_timeout = 100
request_slowlog_timeout = 0
slowlog = var/log/slow.log
5.8 创建php-fpm启动脚本
vim /etc/init.d/php-fpm
chmod +x /etc/init.d/php-fpm
以下是一份参考:
#! /bin/sh
### BEGIN INIT INFO
# Provides:
# Required-Start:
$remote_fs $network
# Required-Stop:
$remote_fs $network
# Default-Start:
# Default-Stop:
# Short-Description: starts php-fpm
# Description:
starts the PHP FastCGI Process Manager daemon
### END INIT INFO
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${exec_prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=${prefix}/var/run/php-fpm.pid
php_opts=&--fpm-config $php_fpm_CONF --pid $php_fpm_PID&
wait_for_pid () {
while test $try -lt 35 ; do
case &$1& in
'created')
if [ -f &$2& ] ; then
'removed')
if [ ! -f &$2& ] ; then
try=`expr $try + 1`
case &$1& in
echo -n &Starting php-fpm &
$php_fpm_BIN --daemonize $php_opts
if [ &$?& != 0 ] ; then
echo & failed&
wait_for_pid created $php_fpm_PID
if [ -n &$try& ] ; then
echo & failed&
echo & done&
echo -n &Gracefully shutting down php-fpm &
if [ ! -r $php_fpm_PID ] ; then
echo &warning, no pid file found - php-fpm is not running ?&
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n &$try& ] ; then
echo & failed. Use force-quit&
echo & done&
force-quit)
echo -n &Terminating php-fpm &
if [ ! -r $php_fpm_PID ] ; then
echo &warning, no pid file found - php-fpm is not running ?&
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n &$try& ] ; then
echo & failed&
echo & done&
echo -n &Reload service php-fpm &
if [ ! -r $php_fpm_PID ] ; then
echo &warning, no pid file found - php-fpm is not running ?&
kill -USR2 `cat $php_fpm_PID`
echo & done&
echo &Usage: $0 {start|stop|force-quit|restart|reload}&
5.9 启动php-fpm
groupadd www
useradd -s /sbin/nologin -g www www
/etc/init.d/php-fpm start
见到如下图代表启动成功:
6 安装nginx
6.1 下载nginx
wget /nginx/nginx-1.6.0.tar.gz
6.2 安装依赖
6.2.1 pcre
wget http://down1.chinaunix.net/distfiles/pcre-8.12.tar.bz2
tar -jxvf pcre-8.12.tar.bz2
cd pcre-8.12
./configure
make -j 2 && make install
6.3 解压编译nginx
tar -zxvf nginx-1.6.0.tar.gz
cd nginx-1.6.0
./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module --with-ipv6
make -j 2 && make install
ln -s /usr/local/nginx/sbin/nginx /usr/bin/nginx
6.4 配置nginx
/usr/local/nginx/conf/nginx.conf
下面是一份参考配置:
/home/wwwlogs/nginx_error.
/usr/local/nginx/logs/nginx.
#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;
worker_connections 51200;
default_type
application/octet-
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 4 32k;
client_max_body_size 50m;
keepalive_timeout 60;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 256k;
gzip_min_length
gzip_buffers
gzip_http_version 1.0;
gzip_comp_level 2;
gzip_types
text/plain application/x-javascript text/css application/
gzip_proxied
expired no-cache no-
gzip_disable
&MSIE [1-6]\.&;
#limit_conn_zone $binary_remote_addr zone=perip:10m;
##If enable limit_conn_zone,add &limit_conn perip 10;& to server section.
#log format
log_format
'$remote_addr - $remote_user [$time_local] &$request& '
'$status $body_bytes_sent &$http_referer& '
'&$http_user_agent& $http_x_forwarded_for';
#listen [::]:80 default ipv6only=
server_name www.lnmp.
index index.html index.htm index.
/home/wwwroot/
#error_page
location ~ [^/]\.php(/|$)
# comment try_files $uri =404; to enable pathinfo
try_files $uri =404;
fastcgi_pass
unix:/tmp/php-cgi.
fastcgi_index index.
include fastcgi.
#include pathinfo.
location /nginx_status {
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
location ~ .*\.(js|css)?$
access_log
/home/wwwlogs/access.
include vhost/*.
6.5 后期配置
mkdir -p /home/wwwroot/default
chmod +w /home/wwwroot/default
mkdir -p /home/wwwlogs
chmod 777 /home/wwwlogs
chown -R www:www /home/wwwroot/default
6.6 编写nginx启动脚本
vim /etc/init.d/nginx
chmod +x /etc/init.d/nginx
下面是一份参考配置:
#! /bin/sh
# chkconfig:
# Description: Startup script for nginx webserver on Debian. Place in /etc/init.d and
# run 'update-rc.d -f nginx defaults', or use the appropriate command on your
# distro. For CentOS/Redhat run: 'chkconfig --add nginx'
### BEGIN INIT INFO
# Provides:
# Required-Start:
# Required-Stop:
# Default-Start:
# Default-Stop:
# Short-Description: starts the nginx web server
# Description:
starts nginx using start-stop-daemon
### END INIT INFO
# website:
http://lnmp.org
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
NAME=nginx
NGINX_BIN=/usr/local/nginx/sbin/$NAME
CONFIGFILE=/usr/local/nginx/conf/$NAME.conf
PIDFILE=/usr/local/nginx/logs/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
case &$1& in
echo -n &Starting $NAME... &
if netstat -tnpl | grep -then
echo &$NAME (pid `pidof $NAME`) already running.&
$NGINX_BIN -c $CONFIGFILE
if [ &$?& != 0 ] ; then
echo & failed&
echo & done&
echo -n &Stoping $NAME... &
if ! netstat -tnpl | grep - then
echo &$NAME is not running.&
$NGINX_BIN -s stop
if [ &$?& != 0 ] ; then
echo & failed. Use force-quit&
echo & done&
if netstat -tnpl | grep - then
PID=`pidof nginx`
echo &$NAME (pid $PID) is running...&
echo &$NAME is stopped&
force-quit)
echo -n &Terminating $NAME... &
if ! netstat -tnpl | grep - then
echo &$NAME is not running.&
kill `pidof $NAME`
if [ &$?& != 0 ] ; then
echo & failed&
echo & done&
$SCRIPTNAME stop
$SCRIPTNAME start
echo -n &Reload service $NAME... &
if netstat -tnpl | grep - then
$NGINX_BIN -s reload
echo & done&
echo &$NAME is not running, can't reload.&
configtest)
echo -n &Test $NAME configure files... &
$NGINX_BIN -t
echo &Usage: $SCRIPTNAME {start|stop|force-quit|restart|reload|status|configtest}&
6.6 测试nginx
6.6.1 写php测试代码
cat &/home/wwwroot/default/index.php&&EOF
phpinfo();
/etc/init.d/nginx start
ps -ef|grep nginx
见到下图，代表启动成功:
如果你开启了selinux，请关闭，否则访问不了:
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
临时关闭selinux:
setenforce 0
关闭防火墙:
service iptables stop
通过浏览器访问下,如下图:
7 设置开机启动
chkconfig --level 345 php-fpm on
chkconfig --level 345 nginx on
chkconfig --level 345 mysql on
7 安装redis
7.1 下载redis
wget http://download.redis.io/releases/redis-2.8.19.tar.gz
这里会快很多:
wget http://download.redis.io/releases/redis-2.8.19.tar.gz
7.2 解压编译redis
tar -zxvf redis-2.8.19.tar.gz
cd redis-2.8.19
make PREFIX=/usr/local/redis install
7.3 配置redis
mkdir -p /usr/local/redis/etc/
cp redis.conf
/usr/local/redis/etc/
sed -i 's/daemonize no/daemonize yes/g' /usr/local/redis/etc/redis.conf
7.4 编写redis启动脚本
vim /etc/init.d/redis
chmod +x /etc/init.d/redis
下面是一份参考配置:
#! /bin/bash
# redis - this script starts and stops the redis-server daemon
# chkconfig:
# description:
Redis is a persistent key-value database
### BEGIN INIT INFO
# Provides:
# Required-Start:
# Required-Stop:
# Should-Start:
# Should-Stop:
# Default-Start:
# Default-Stop:
# Short-Description:
redis-server daemon
# Description:
redis-server daemon
### END INIT INFO
REDISPORT=6379
EXEC=/usr/local/redis/bin/redis-server
REDIS_CLI=/usr/local/redis/bin/redis-cli
PIDFILE=/var/run/redis.pid
CONF=&/usr/local/redis/etc/redis.conf&
case &$1& in
if [ -f $PIDFILE ]
echo &$PIDFILE exists, process is already running or crashed&
echo &Starting Redis server...&
$EXEC $CONF
if [ &$?&=&0& ]
echo &Redis is running...&
if [ ! -f $PIDFILE ]
echo &$PIDFILE does not exist, process is not running&
PID=$(cat $PIDFILE)
echo &Stopping ...&
$REDIS_CLI -p $REDISPORT shutdown
while [ -x ${PIDFILE} ]
echo &Waiting for Redis to shutdown ...&
echo &Redis stopped&
${0} start
echo &Usage: /etc/init.d/redis {start|stop|restart}& &&2
7.5 启动redis
/etc/init.d/redis start
查看redis是否启动
ps -ef|grep redis
如果看到如下图，恭喜你，启动成功:
8 升级gcc，gdb等(非常漫长,如果系统中自带的g++支持C++11，可跳过此步骤)
8.1 下载gcc4.9.2
使用日本的源可能会快些:
wget http://ftp.tsukuba.wide.ad.jp/software/gcc/releases/gcc-4.9.2/gcc-4.9.2.tar.gz
8.2 解压编译gcc4.9.2
tar -zxvf gcc-4.9.2.tar.gz
cd gcc-4.9.2
./contrib/download_prerequisites
mkdir gcc-build-4.9.2
cd gcc-build-4.9.2
../configure --prefix=/usr -enable-checking=release -enable-languages=c,c++ -disable-multilib
make -j 2 && make install
8.3 下载termcap
wget ftp://ftp.gnu.org/gnu/termcap/termcap-1.3.1.tar.gz
8.4 解压编译termcap
tar -zxvf termcap-1.3.1.tar.gz
cd termcap-1.3.1
./configure --prefix=/usr
make -j 2 && make install
8.5 下载gdb
wget http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.gz
8.6 解压编译gdb
tar -zxvf gdb-7.9.tar.gz
cd gdb-7.9
./configure --prefix=/usr
make -j 2 && make install
9 重启电脑
shutdown -r now
10.1 下载pb
wget /google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
10.2 解压编译pb
tar -zxvf protobuf-2.6.1
cd protobuf-2.6.1
./configure --prefix=/usr/local/protobuf
make -j 2 && make install
11 下载TeamTalk代码
git clone /mogujie/TeamTalk.git
12 生成pb文件
12.1 拷贝pb相关文件
拷贝pb的库、头文件到TeamTalk相关目录中:
mkdir -p /root/TeamTalk/server/src/base/pb/lib/linux/
cp /usr/local/protobuf/lib/libprotobuf-lite.a /root/TeamTalk/server/src/base/pb/lib/linux/
-r /usr/local/protobuf/include/* /root/TeamTalk/server/src/base/pb/
12.2 生成pb协议
cd /root/TeamTalk/pb
export PATH=$PATH:/usr/local/protobuf/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/protobuf/lib
sh create.sh
生成协议相关源码文件。
sh sync.sh
将相关文件拷贝到server 目录下。
13 安装依赖
cd /root/TeamTalk/server/src
sh make_log4cxx.sh
sh make_hiredis.sh
14 编译server
由于我们是源码安装mysql的，所以对db_proxy_server中的CMakeList做一定的修改.
SET(MYSQL_INCLUDE_DIR /usr/include/mysql)
SET(MYSQL_LIB /usr/lib64/mysql)
SET(MYSQL_INCLUDE_DIR /usr/local/mysql/include)
SET(MYSQL_LIB /usr/local/mysql/lib)
进入server目录下，执行:
sh build.sh version 1.0.0
如果一切顺利，你将会看到如下画面:
15 配置server(时间太晚了，明天再来写吧)
配置就以本机192.168.1.150 为例。
15.1 配置文件说明:
15.1.1 login_server
ClientListenIP=0.0.0.0
# can use multiple ip, seperate by ';'
ClientPort=8008
HttpListenIP=0.0.0.0
HttpPort=8080
MsgServerListenIP=0.0.0.0
# can use multiple ip, seperate by ';'
MsgServerPort=8100
msfs=http://127.0.0.1:8700/
discovery=http://127.0.0.1/api/discovery
ClientListenIP:目前已经作废。
ClientPort:与上一个配套，同样作废。
HttpListenIP:供客户端过来获取msg_server及其他参数的接口地址，走http协议。
HttpPort:与上一个配套使用。
MsgServerListenIP:用于监听msg_server上报信息使用。
MsgServerPort:与上一个配套使用。msg_server启动的时候回来连接该ip:port，以上报自己的信息。
在运行过程中，也会实时将自己的信息汇报给login_server。
msfs:小文件存储的地址，该配置是提供给客户端获取参数时使用。
discovery:发现内容获取地址，该配置是提供给客户端获取参数时使用。
ClientListenIP=192.168.1.150
ClientPort=8008
HttpListenIP=192.168.1.150
HttpPort=8080
MsgServerListenIP=192.168.1.150
MsgServerPort=8100
msfs=http://192.168.1.150:8700/
discovery=http://192.168.1.150/api/discovery
15.1.2 route_server
ListenIP=0.0.0.0
# Listening IP
ListenMsgPort=8200
# Listening Port for MsgServer
route_server配置比较简单，一个监听ip，一个监听port就OK了，供msg_server连接上来用。
ListenIP=192.168.1.150
ListenMsgPort=8200
15.1.3 http_msg_server
ListenIP=0.0.0.0
ListenPort=8400
ConcurrentDBConnCnt=4
DBServerIP1=127.0.0.1
DBServerPort1=10600
DBServerIP2=127.0.0.1
DBServerPort2=10600
RouteServerIP1=localhost
RouteServerPort1=8200
#RouteServerIP2=localhost
#RouteServerPort2=8201
ListenIP:监听IP，供其他人来调用http_msg_server接口，比如，php在创建群组的时候，就会来调用http_msg_server的接口。
ListenPort:监听端口，与上一个配套使用。
ConcurrentDBConnCnt:DB数目，目前必须配置为2的整数倍，是历史遗留问题，后期会修复。
DBServerIP(x):db_proxy_server监听的IP，http_msg_server会主动去连接。
DBServerPort(x):db_proxy_server监听的Port
RouteServerIP(x):route_server监听的IP，http_msg_server会主动去连接。
RouteServer(x):route_server监听的Port
ListenIP=192.168.1.150
ListenPort=8400
ConcurrentDBConnCnt=4
DBServerIP1=192.168.1.150
DBServerPort1=10600
DBServerIP2=192.168.1.150
DBServerPort2=10600
RouteServerIP1=192.168.1.150
RouteServerPort1=8200
15.1.4 msg_server
ListenIP=0.0.0.0
ListenPort=8000
ConcurrentDBConnCnt=2
DBServerIP1=127.0.0.1
DBServerPort1=10600
DBServerIP2=127.0.0.1
DBServerPort2=10600
LoginServerIP1=127.0.0.1
LoginServerPort1=8100
#LoginServerIP2=localhost
#LoginServerPort2=8101
RouteServerIP1=127.0.0.1
RouteServerPort1=8200
#RouteServerIP2=localhost
#RouteServerPort2=8201
PushServerIP1=127.0.0.1
PushServerPort1=8500
FileServerIP1=127.0.0.1
FileServerPort1=8600
#FileServerIP2=localhost
#FileServerPort2=8601
IpAddr1=127.0.0.1
IpAddr2=127.0.0.1
MaxConnCnt=100000
ListenIP:监听客户端连接上来的IP。
ListenPort:与上一个配套使用，监听客户端连接的port。
ConcurrentDBConnCnt:db_proxy_server个数，同http_msg_server 一样。
DBServerIP(x):db_proxy_server监听的ip，msg_server主动去连接。
DBServerPort(x):db_proxy_server监听的port。
LoginServerIP(x):login_server监听的ip，msg_server会主动去连接，汇报本机信息。
LoginServerPort(x):login_server监听的port。
RouteServerIP(x):route_server监听的IP，msg_server主动去连接。
RouteServerPort(x):route_server监听的port。
PushServerIP(x):push_server监听的IP，msg_server会主动去连接，给ios系统推送消息。
PushServerPort(x):push_server监听的port。
FileServerIP(x):file_server监听的IP，msg_server会主动去连接，用于文件传输，暂时未用到。
FileServerPort(x):file_server监听的port。
IpAddr1:msg_server监听的ip，用于汇报给login_server，便于login_server在客户端请求的时候返回给客户端。注意，这个ip一定要是客户端能连接的ip，之前发现好多人配置成127.0.0.1，这是不行的。
IpAddr2:同上。
aesKey:消息文本加密密钥.这里配置主要在msg_server向push_server推送的时候需要将加密的消息进行解密。
ListenIP=192.168.1.150
ListenPort=8000
ConcurrentDBConnCnt=2
DBServerIP1=192.168.1.150
DBServerPort1=10600
DBServerIP2=192.168.1.150
DBServerPort2=10600
LoginServerIP1=192.168.1.150
LoginServerPort1=8100
RouteServerIP1=192.168.1.150
RouteServerPort1=8200
PushServerIP1=192.168.1.150
PushServerPort1=8500
FileServerIP1=192.168.1.150
FileServerPort1=8600
IpAddr1=192.168.1.150
IpAddr2=192.168.1.150
MaxConnCnt=100000
15.1.5 db_proxy_server
ListenIP=127.0.0.1
ListenPort=10600
ThreadNum=48
# double the number of CPU core
MsfsSite=127.0.0.1
#configure for mysql
DBInstances=teamtalk_master,teamtalk_slave
#teamtalk_master
teamtalk_master_host=127.0.0.1
teamtalk_master_port=3306
teamtalk_master_dbname=teamtalk
teamtalk_master_username=root
teamtalk_master_password=12345
teamtalk_master_maxconncnt=16
#teamtalk_slave
teamtalk_slave_host=127.0.0.1
teamtalk_slave_port=3306
teamtalk_slave_dbname=teamtalk
teamtalk_slave_username=root
teamtalk_slave_password=12345
teamtalk_slave_maxconncnt=16
#configure for unread
CacheInstances=unread,group_set,token,group_member
#未读消息计数器的redis
unread_host=127.0.0.1
unread_port=6379
unread_db=1
unread_maxconncnt=16
#群组设置redis
group_set_host=127.0.0.1
group_set_port=6379
group_set_db=2
group_set_maxconncnt=16
#deviceToken redis
token_host=127.0.0.1
token_port=6379
token_db=4
token_maxconncnt=16
#GroupMember
group_member_host=127.0.0.1
group_member_port=6379
group_member_db=5
group_member_maxconncnt=48
ListenIP:db_proxy_server监听的IP。
ListenPort:db_proxy_server监听的port
ThreadNum:工作线程个数。
MsfsSite:配置msfs服务器的地址，用于发送语音的时候上传保存语音文本。
DBInstances:db实例名称。一般配置一主一从即可，其他根据自己的需求修改。
(xxxx)_host:xxxx实例的ip
(xxxx)_port:xxxx实例的port
(xxxx)_dbname:xxxx实例的scheme名称
(xxxx)_username:xxxx实例的用户名
(xxxx)_password:xxxx实例的密码
(xxxx)_maxconncnt:xxxx实例最大连接数
CacheInstances:cache实例名称。
(xxxx)_host:xxxx实例的ip
(xxxx)_port:xxxx实例的port
(xxxx)_db:xxxx实例的db
(xxxx)_maxconncnt:xxxx
aesKey:消息加密密钥。
目前我们db实例配置的一主一从，cache实例配置了5个实例，分别是:
unread:主要用于未读计数。
group_set:群组设置。设置屏蔽群组。
token:主要用于保存ios系统的token。
group_member:保存群成员信息。
ListenIP=192.168.1.150
ListenPort=10600
ThreadNum=48
# double the number of CPU core
MsfsSite=http://192.168.1.150:8700/
#configure for mysql
DBInstances=teamtalk_master,teamtalk_slave
#teamtalk_master
teamtalk_master_host=192.168.1.150
teamtalk_master_port=3306
teamtalk_master_dbname=teamtalk
teamtalk_master_username=teamtalk
teamtalk_master_password=test@123
teamtalk_master_maxconncnt=16
#teamtalk_slave
teamtalk_slave_host=192.168.1.150
teamtalk_slave_port=3306
teamtalk_slave_dbname=teamtalk
teamtalk_slave_username=teamtalk
teamtalk_slave_password=test@123
teamtalk_slave_maxconncnt=16
#configure for unread
CacheInstances=unread,group_set,token,group_member
#未读消息计数器的redis
unread_host=192.168.1.150
unread_port=6379
unread_db=1
unread_maxconncnt=16
#群组设置redis
group_set_host=192.168.1.150
group_set_port=6379
group_set_db=2
group_set_maxconncnt=16
#deviceToken redis
token_host=192.168.1.150
token_port=6379
token_db=4
token_maxconncnt=16
#GroupMember
group_member_host=192.168.1.150
group_member_port=6379
group_member_db=5
group_member_maxconncnt=48
16.1 导入mysql
登陆mysql:
mysql -uroot -p
输入密码:test123.
创建TeamTalk数据库:
create database teamtalk
mysql& crea
Query OK, 1 row affected (0.00 sec)
创建成功。
创建teamtalk用户并给teamtalk用户授权teamtalk的操作:
grant select,insert,update,delete on teamtalk.* to 'teamtalk'@'%' identified by 'test@123';
导入数据库.
source /root/TeamTalk/auto_setup/mariadb/conf/ttopen.
+--------------------+
| Tables_in_teamtalk |
+--------------------+
| IMDepart
| IMDiscovery
| IMGroupMember
| IMGroupMessage_0
| IMGroupMessage_1
| IMGroupMessage_2
| IMGroupMessage_3
| IMGroupMessage_4
| IMGroupMessage_5
| IMGroupMessage_6
| IMGroupMessage_7
| IMMessage_0
| IMMessage_1
| IMMessage_2
| IMMessage_3
| IMMessage_4
| IMMessage_5
| IMMessage_6
| IMMessage_7
| IMRecentSession
| IMRelationShip
+--------------------+
25 rows in set (0.00 sec)
16.2 修改php
执行如下命令:
cd /home/wwwroot/default
cp -r /root/TeamTalk/php/* /home/wwwroot/default
修改config.php:
vim application/config/config.php
修改第18-19行:
$config['msfs_url'] = 'http://192.168.1.150:8700/';
$config['http_url'] = 'http://192.168.1.150:8400';
修改database.php
vim application/config/database.php
修改52-54行:
$db['default']['hostname'] = '192.168.1.150';
$db['default']['username'] = 'tamtalk';
$db['default']['password'] = 'test@123';
$db['default']['database'] = 'teamtalk';
访问后，看到如下图:
16.3 修改nginx.conf
之前给出的配置有点问题,新配置如下:
/home/wwwlogs/nginx_error.
/usr/local/nginx/logs/nginx.
#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;
worker_connections 51200;
default_type
application/octet-
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 4 32k;
client_max_body_size 50m;
keepalive_timeout 60;
fastcgi_connect_timeout 300;
fastcgi_send_timeout 300;
fastcgi_read_timeout 300;
fastcgi_buffer_size 64k;
fastcgi_buffers 4 64k;
fastcgi_busy_buffers_size 128k;
fastcgi_temp_file_write_size 256k;
gzip_min_length
gzip_buffers
gzip_http_version 1.0;
gzip_comp_level 2;
gzip_types
text/plain application/x-javascript text/css application/
gzip_proxied
expired no-cache no-
gzip_disable
&MSIE [1-6]\.&;
log_format
'$remote_addr - $remote_user [$time_local] &$request& '
'$status $body_bytes_sent &$http_referer& '
'&$http_user_agent& $http_x_forwarded_for';
server_name 192.168.1.150;
index index.html index.htm index.php default.html default.htm default.
/home/wwwroot/
location ~ \.php($|/) {
fastcgi_pass
unix:/tmp/php-cgi.
fastcgi_index
fastcgi_split_path_info ^(.+\.php)(.*)$;
fastcgi_param
PATH_INFO $fastcgi_path_
fastcgi_param
SCRIPT_FILENAME
$document_root$fastcgi_script_
location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
location ~ .*\.(js|css)?$
if (!-e $request_filename) {
rewrite ^/(.*)$ /index.php/$1
在后台添加test用户，运行ios 模拟器，登陆看到如下图
18、virtualBox 环境
置于怎么加载虚拟机，怎么运行虚拟机请自行百度，谷歌。
18.1 我虚拟机的环境
链接: /s/1sjx8g49 密码: 4572
18.2 虚拟机硬盘
因网盘大小限制1G，所以将虚拟机硬盘切分成3个文件上传:
链接: /s/1mgDXvwW 密码: tgzp
请使用如下命令合并解压:
cat CentOS-hd.tar.gz.* & CentOS-hd.tar.gz
tar -zxvf CentOS-hd.tar.gz
18.3 账号信息
虚拟机账号信息如下:
linux账号密码:root/123456
mysql root账号密码:root/test123
mysql teamtalk账号密码:teamtalk/test@123
php 后台账号密码:admin/admin
测试用户账号密码:test/test
启动虚拟机后，运行如下命令:
ps -ef|grep server
如果看到如下:
[root@zhyh ~]# ps -ef|grep server
00:00:05 /usr/local/redis/bin/redis-server *:6379
00:00:21 ./db_proxy_server
00:00:02 ./http_msg_server
00:00:02 ./route_server
00:00:02 ./login_server
00:00:02 ./msg_server
0 22:34 pts/2
00:00:00 grep server
如果没有发现:db_proxy_server, http_msg_server,route_server,login_server,msg_server的进程，请执行如下命令启动:
cd /usr/local/teamtalk
../daeml xxxx
xxx代表相应的程序名。通过查看:xxxx/log/default.log 查看程序错误。
18.5 redis,php,nginx,mysql的启动，停止与重启
/etc/init.d/redis {start|stop|restart}
/etc/init.d/php-fpm {start|stop|force-quit|restart|reload}
/etc/init.d/nginx {start|stop|force-quit|restart|reload|status|configtest}
/etc/init.d/mysql {start|stop|restart|reload|force-reload|status}
[ MySQL server options ]
如果您觉得这篇文章对您有帮助，欢迎您给我打赏。通过微信扫一扫，即可。
添加新评论
: 怎么解决的啊？我也遇到了
: mysql中teamtalk用户创建的问题，已解决
: php后台管理，登录admin/admin,总是提示密码错误是怎...
: 请问一下，音视频版本（webrtc）的teamtalk什么时候出来
: IMRecentSession和IMRelationShip两个...
: 这个动态库的问题，只需要把这个.so文件放在/lib64中，然后...
: 很好，一键教做人
: 用了博主的VirtualBox镜像盘，所有服务都正常启动。但是用...
: 小白一键部署~ 能用docker版就更好了